WINNER OF THE

Features

The simple touch controller is a central controller that can monitor and control up to 64 indoor unit groups. Using 2 simple touch controllers allows monitoring and controlling of up to 128 indoor unit groups.

1

8-inch touch panel screen for easy operation
and monitoring

2

Flexible operation via control units
(Group, All Groups, Zone)

Group control for individual Group control
All Group control for unified control
Zone control for simpler setting procedures

3

Group monitoring at a glance

The signs displayed on the Group monitoring panels help
you understand the operation status
of each Group at a glance.

4

Tailor-made schedule timer setting

A maximum of 28 patterns for the ON/OFF timers per week
are possible.

5

Various operation control patterns

Five operation control modes coupled with remote controller
rejection/acceptance settings
yields a total of 20 different possible patterns of control modes for
each Group.

6

Easy to perform installation and maintenance related
procedures

Installation or maintenance related procedures such as Test
Operation or Forced Reset can be easily performed from the
SETTINGS menu.

System Configuration

With the simple touch controller, unified operation/stop is possible for up to a maximum of 64 Groups of indoor units.When using 2 simple touch controllers, unified operation is possible for up to a maximum of 128 Groups.With this optional controller, control mode settings such as operation, stop, operation by timer, and ON/OFF control by remote controller enabled/disabled can be set per Group or Zone, while enabling the control and display of operation states such as set temperature. The simple touch controller can be connected with an external key system, host computer monitor panel, etc., through forced OFF input(non-voltage normally open contactor).A Zone is one or more Groups together. In general, the same settings are applicable throughout a Zone.

Note:

The simple touch controller and the separately sold remote controller adaptor circuit board or Group Remote controller adaptor cannot be used together.